An AI agent that applies to roles like this on employers' own sites. 25 applications free, no card needed.
AI summary of this job
Beta Read in 10 secondsAn Engineer- Power Electronics V&V role at Eaton in Pune for people with 2–5 years of experience. You'll handle power electronics testing for AC‑DC and DC‑DC converters, utilizing Python and MATLAB, and ensuring Compliance.
- Hadapsar
- Work from office
- 2–5 years
- Bachelor's degree
What you'll do
- Test AC-DC and DC-DC converters
- Prepare safe high-power test setups
- Analyze test data and failures
Good fit if you
- Have power electronics testing experience
- Know high-voltage electrical safety practices
- Understand compliance and regulatory requirements
AI-generated from the job description. Check the full description before you apply.
Job Description
What you’ll do:
-Should have understanding and basic domain knowledge of power electronics testing for AC‑DC and DC‑DC converters, including DVT and EVT.
-Should have understanding of converting product requirements into structured test plans for validation.
-Should have experience in preparing safe high‑power test setups with proper wiring, grounding, and interlocks.
-Should have understanding of selecting and operating test equipment such as power sources, loads, and analyzers.
-Should have knowledge of defining safe test limits and operating conditions for high‑power systems.
-Should have understanding of accurate measurement and data logging using calibrated instruments.
-Should have experience in analyzing test data and identifying failures or abnormalities.
-Should have understanding of preparing clear and concise test reports for engineering and customer teams.
-Should have experience in electrical safety practices, including PPE usage and lockout‑tagout procedures.
-Should have knowledge of compliance and regulatory requirements such as CE, UL, and IEC, BIS standards.
-Should have experience in maintaining lab discipline and ensuring equipment readiness and calibration.
-Should have understanding of managing equipment bookings and maintaining proper documentation.
-Should have understanding of coordinating with cross‑functional teams for smooth test execution.
-Should have understanding of communicating risks, issues, and delays clearly and on time.
-Should have experience in guiding and training new team members in safe lab practices.
Qualifications:
- Education level required : Bachelor’s degree in Electrical Engineering or Electronics
- Years and area of experience : Bachelor’s degree in Electrical Engineering or Electronics, with 3–6 years of experience in power electronics product testing
- Technical knowledge :
- Good understanding of power electronics fundamentals.
- Knowledge of AC-DC and DC-DC converter topologies such as Buck, Boost, Flyback, PFC, LLC and PSFB.
- Understanding of MOSFETs, IGBTs, SiC devices, gate drivers, magnetics and power components.
- Hands-on experience in power electronics product testing and validation.
- Experience in preparing test plans, test procedures and technical reports.
- Practical knowledge of oscilloscope measurement techniques, including voltage, current and switching waveform measurements.
- Understanding of efficiency, losses, thermal performance, dynamic response and protection validation.
- Ability to read schematics, specifications, datasheets and product requirements.
- Good troubleshooting and root-cause-analysis skills.
- Understanding of high-voltage electrical safety and laboratory practices.
- Basic knowledge of EMI/EMC testing and applicable IEC/UL standards.
- Exposure to MATLAB, Python, LabVIEW or automated test/data-analysis tools will be an advantage.
Skills:
- Accountability: Takes complete responsibility of assigned tasks and delivers results despite of roadblocks
- Passion: Pursues everything with drive and motivates others around to contribute towards the cause
- Accountability: Takes full ownership of tasks, decisions, and outcomes, ensuring commitments are met consistently.
- Passion: Shows strong enthusiasm and energy toward learning, testing, and delivering high‑quality technical work.
- Resourceful: Finds effective solutions using available tools, knowledge, and creativity, even in challenging situations.
- Problem Solving: Identifies issues quickly, analyzes root causes, and proposes practical, data‑driven solutions.
- Learner: Continuously seeks to improve skills, adopt new technologies, and stay updated with industry practices.
- Transparency: Communicates progress, risks, and challenges openly and honestly with the team and stakeholders
Skills
PythonMATLABComplianceProblem SolvingTeamsIf a job posting appears fraudulent, asks for payment, contains misleading information, or violates our guidelines, please report it immediately. Our team will review it promptly, Jobaaj does not charge any fee from the applicants.
About Company
In 1911, Joseph O. Eaton, brother-in-law Henning O. Taube and Viggo V. Torbensen, incorporated the Torbensen Gear and Axle Co. in Bloomfield, New Jersey. With financial backing from Torbensen's mother, the company was set to manufacture Torbensen's patented internal-gear truck axle. In 1914, the company moved to Cleveland, Ohio, to be closer to its core business, the automotive industry.
The Torbensen Axle Company incorporated in Ohio in 1916, succeeding the New Jersey corporation. A year later, Republic Motor Truck Company, Torbensen's largest customer bought out the company. But Eaton and Torbensen were not content and bowed out of Republic to form the Eaton Axle Company in 1919. A year later, in 1920, Eaton Axle Company merged with Standard Parts. Standard Parts went in receivership later the same year and was later liquidated. In 1923, Eaton bought the Torbensen Axle Co. back from Republic and changed the name to the Eaton Axle and Spring Company.
Eaton officers believed the quickest way to grow the business was through acquisitions and began buying companies in the automotive industry. By 1932, the diversified company changed its name to Eaton Manufacturing Company. In 1937, Eaton became international by opening a manufacturing plant in Canada. In 1958 Eaton Corporation acquired Fuller Manufacturing. The company name changed once again in 1965 to Eaton Yale & Towne Inc. after the acquisition of Yale & Towne Manufacturing Co. in 1963. Stockholders approved the change to the company's current name in 1971. In 1978, Eaton Corporation acquired Samuel Moore & Company, Kenway Systems, and Cutler-Hammer.
Similar Jobs
View allLooking for something similar?
New IT / Software Development & Related roles in Hadapsar.
One email a day. Unsubscribe any time.

