J_1322 - Electrical Systems Integration Engineer (Aerospace/UAV)

Department Icon IT / Software Development & Related
Posted: 2 weeks ago
2-5 years
Pune, Maharashtra, India
IT / Software Development & Related
work from office
Full Time
Closes 31 Dec 2026

Posted: 2 weeks ago
Let Jobaaj One apply for you

An AI agent that applies to roles like this on employers' own sites. 25 applications free, no card needed.

AI Summary
Job Description
Similar Jobs
Please verify your account first! Send OTP

AI summary of this job

Beta Read in 10 seconds

An Electrical Systems Integration Engineer role at Speed Engineering Solutions in Pune, Maharashtra, India for people with 2–5 years of experience. You'll handle electrical system architecture, EWIS development, and MIL-STD-461 compliance. You'll collaborate with multidisciplinary teams to ensure successful product development.

  • Pune
  • Work from office
  • 2–5 years
  • Bachelor's or Master's degree

What you'll do

  • Develop aircraft-level electrical architecture
  • Design Electrical Wiring Interconnection Systems
  • Support qualification and certification activities

Good fit if you

  • Have 2–5 years of experience
  • Know MIL-STD-461, MIL-STD-464, and MIL-STD-810
  • Understand electrical design and embedded systems
Sounds like you? Applying takes under a minute.

AI-generated from the job description. Check the full description before you apply.

Helpful?

Job Description

Key Responsibilities:
  • Own and develop aircraft-level electrical architecture for UAV and aerospace platforms, including power distribution, electrical interfaces, and system integration.
  • Define and manage electrical interfaces between avionics, flight control systems, propulsion systems, batteries/BMS, communication systems, navigation systems, payloads, and other aircraft subsystems.
  • Develop and maintain Interface Control Documents (ICDs), electrical schematics, wiring diagrams, electrical interface specifications, and system architecture documentation.
  • Evaluate electrical systems for redundancy, fault tolerance, fail-safe operation, reliability, maintainability, and weight optimization.
  • Develop and manage electrical power budgets, power distribution networks, power conversion strategies, and electrical protection schemes.
  • Analyze electrical load requirements, startup and transient conditions, voltage drops, load shedding, and power system performance across various operating scenarios.
  • Lead the design and review of aircraft Electrical Wiring Interconnection Systems (EWIS), wiring harness architectures, harness routing, and cable management solutions.
  • Define wire, cable, connector, and harness component selection criteria based on electrical, environmental, mechanical, safety, and EMI/EMC requirements.
  • Review harness drawings, wiring diagrams, connector pinouts, wire lists, BOMs, and manufacturing documentation.
  • Establish and implement standards for harness manufacturing, installation, inspection, testing, crimping, soldering, shielding, splicing, and termination practices.
  • Lead connector and electrical interface management activities, including connector selection, standardization, pin allocation, derating, and configuration control.
  • Define and implement EMI/EMC design practices related to grounding, bonding, shielding, filtering, cable segregation, and RF isolation.
  • Identify and resolve EMI/EMC issues during integration, qualification, ground testing, and flight testing activities.
  • Support qualification and certification activities in accordance with relevant aerospace and military standards.
  • Develop electrical integration, verification, and validation plans for aircraft and subsystem-level testing.
  • Perform and support electrical testing activities including continuity, insulation resistance, Hi-Pot, bonding, load, and communication interface testing.
  • Support aircraft integration, troubleshooting, failure investigations, root-cause analysis, and corrective action implementation.
  • Prepare and maintain electrical architecture documents, schematics, harness drawings, BOMs, wire lists, power budgets, test procedures, and verification reports.
  • Manage engineering documentation, configuration control, change management, and product lifecycle records.
  • Collaborate with Systems, Avionics, Flight Controls, Propulsion, Mechanical, Software, Manufacturing, Quality, Supply Chain, and Flight Test teams to ensure successful product development and integration.
  • Provide technical guidance to integration, manufacturing, testing, and supplier teams on electrical system implementation and troubleshooting.
Skills and Experience Required:
  • Bachelor's or Master's degree in Electrical Engineering, Electronics Engineering, Aerospace Engineering, Mechatronics, or a related discipline.
  • Strong experience in electrical system architecture, system integration, and electrical design for UAV, aerospace, defense, or complex embedded systems.
  • Experience in aircraft electrical power distribution systems, power budgeting, electrical load analysis, and power system integration.
  • Strong understanding of avionics, flight control systems, propulsion systems, batteries, BMS, ESCs, motors, communication systems, and aircraft electrical subsystems.
  • Hands-on experience in electrical wiring harness design, EWIS development, harness routing, cable sizing, wire selection, and connector integration.
  • Knowledge of connector selection, contact systems, backshells, shielding, grounding, bonding, and electrical interface management.
  • Experience in preparing and reviewing electrical schematics, wiring diagrams, ICDs, wire lists, BOMs, and electrical design documentation.
  • Strong understanding of EMI/EMC principles, shielding techniques, grounding strategies, cable segregation, filtering, and RF isolation.
  • Experience supporting EMI/EMC qualification and environmental testing activities.
  • Knowledge of aerospace and military standards such as MIL-STD-461, MIL-STD-464, MIL-STD-810, IPC/WHMA-A-620, or equivalent standards.
  • Experience in electrical testing and verification including continuity testing, insulation resistance testing, Hi-Pot testing, grounding verification, load testing, and system integration testing.
  • Familiarity with electrical failure analysis, troubleshooting, root-cause investigation, and corrective action implementation.
  • Experience with PLM, configuration management, engineering change control, and product documentation management.
  • Ability to interpret and generate electrical interface specifications, architecture documents, and engineering standards.
  • Strong analytical, problem-solving, communication, stakeholder management, and cross-functional collaboration skills.
  • Experience working with multidisciplinary engineering teams and external suppliers in a product development environment.

Skills

DGQACEMILACAirworthinessMIL-STD-461MIL-STD-464And MIL-STD-810BudgetingSupply ChainStakeholder ManagementChange ManagementCommunicationTeamsEmbedded SystemsElectrical Design

If a job posting appears fraudulent, asks for payment, contains misleading information, or violates our guidelines, please report it immediately. Our team will review it promptly, Jobaaj does not charge any fee from the applicants.

Similar Jobs

View all
Loading...

Looking for something similar?

Bag Logo
Jobaaj
Get jobs like this by email

New IT / Software Development & Related roles in Pune.

Job Alert
Google hiring for Specific Roles Apply Now!
1 min ago
New Opportunity
Amazon is hiring freshers Apply Now!
5 min ago
Featured Jobs
Microsoft opening 50+ positions Apply Now!
10 min ago

One email a day. Unsubscribe any time.